የእይታዎች ብዛት:20 ደራሲ:ይህን ጣቢያ ያርትዑ የተለጠፈው: 2023-04-20 ምንጭ:ይህ ጣቢያ
WC67K-80T/2500 NC hydraulic press brake machine with E21 control system.
●The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability and precision of the press brake .
●The motors for backgauge and ram stroke are controlled by inverter, which can achieve high positioning accuracy of the backguage and ram by changing the frequency and voltage of motor .
●Different punch and dies are optional according to customers requirements, such as Multi-v dieradius die, gooseneck die, etc . One set of complete standard punch and die will be included for free.
●X axis ( Backgauge ) and Y axis ( Ram stroke or cylinder stroke ) can be programmed by E21 systemcontroller, which can store up to 40 groups of programs .
●Side and rear metal safety guard meets European safety standard .
●Hydraulic overload can be protected by overflow valve, System pressure can be regulated byre switch easily.
● Foot switch with emergency button can stop the machine immediately when accident happens.
|7||Ram down speed||mm/sec||90|
|8||Ram back speed||mm/sec||85|
|9||Ram working speed||mm/sec||5~12|
|11||Max. Back gauge distance||mm||500|
|12||Front sliding arms||pcs||2|
|13||Bending angle accuracy||(')||30|
|14||Backgauge finger stopper||pcs||2|
|1||Punch and die||set||1|
|2||Front support arms||piece||2|
|4||O-ring and combination gasket||set||1|